Skip to content

prefect.server.schemas.schedules

Schedule schemas

CronSchedule

Bases: PrefectBaseModel

Cron schedule

NOTE: If the timezone is a DST-observing one, then the schedule will adjust itself appropriately. Cron's rules for DST are based on schedule times, not intervals. This means that an hourly cron schedule will fire on every new schedule hour, not every elapsed hour; for example, when clocks are set back this will result in a two-hour pause as the schedule will fire the first time 1am is reached and the first time 2am is reached, 120 minutes later. Longer schedules, such as one that fires at 9am every morning, will automatically adjust for DST.

Parameters:

Name Type Description Default
cron str

a valid cron string

required
timezone str

a valid timezone string in IANA tzdata format (for example, America/New_York).

required
day_or bool

Control how croniter handles day and day_of_week entries. Defaults to True, matching cron which connects those values using OR. If the switch is set to False, the values are connected using AND. This behaves like fcron and enables you to e.g. define a job that executes each 2nd friday of a month by setting the days of month and the weekday.

required
Source code in /home/runner/work/docs/docs/prefect_source/src/prefect/server/schemas/schedules.py
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
class CronSchedule(PrefectBaseModel):
    """
    Cron schedule

    NOTE: If the timezone is a DST-observing one, then the schedule will adjust
    itself appropriately. Cron's rules for DST are based on schedule times, not
    intervals. This means that an hourly cron schedule will fire on every new
    schedule hour, not every elapsed hour; for example, when clocks are set back
    this will result in a two-hour pause as the schedule will fire *the first
    time* 1am is reached and *the first time* 2am is reached, 120 minutes later.
    Longer schedules, such as one that fires at 9am every morning, will
    automatically adjust for DST.

    Args:
        cron (str): a valid cron string
        timezone (str): a valid timezone string in IANA tzdata format (for example,
            America/New_York).
        day_or (bool, optional): Control how croniter handles `day` and `day_of_week`
            entries. Defaults to True, matching cron which connects those values using
            OR. If the switch is set to False, the values are connected using AND. This
            behaves like fcron and enables you to e.g. define a job that executes each
            2nd friday of a month by setting the days of month and the weekday.

    """

    class Config:
        extra = "forbid"

    cron: str = Field(default=..., example="0 0 * * *")
    timezone: Optional[str] = Field(default=None, example="America/New_York")
    day_or: bool = Field(
        default=True,
        description=(
            "Control croniter behavior for handling day and day_of_week entries."
        ),
    )

    @validator("timezone")
    def valid_timezone(cls, v):
        if v and v not in pendulum.tz.timezones:
            raise ValueError(
                f'Invalid timezone: "{v}" (specify in IANA tzdata format, for example,'
                " America/New_York)"
            )
        return v

    @validator("cron")
    def valid_cron_string(cls, v):
        # croniter allows "random" and "hashed" expressions
        # which we do not support https://github.com/kiorky/croniter
        if not croniter.is_valid(v):
            raise ValueError(f'Invalid cron string: "{v}"')
        elif any(c for c in v.split() if c.casefold() in ["R", "H", "r", "h"]):
            raise ValueError(
                f'Random and Hashed expressions are unsupported, received: "{v}"'
            )
        return v

    async def get_dates(
        self,
        n: int = None,
        start: datetime.datetime = None,
        end: datetime.datetime = None,
    ) -> List[pendulum.DateTime]:
        """Retrieves dates from the schedule. Up to 1,000 candidate dates are checked
        following the start date.

        Args:
            n (int): The number of dates to generate
            start (datetime.datetime, optional): The first returned date will be on or
                after this date. Defaults to None.  If a timezone-naive datetime is
                provided, it is assumed to be in the schedule's timezone.
            end (datetime.datetime, optional): The maximum scheduled date to return. If
                a timezone-naive datetime is provided, it is assumed to be in the
                schedule's timezone.

        Returns:
            List[pendulum.DateTime]: A list of dates
        """
        return sorted(self._get_dates_generator(n=n, start=start, end=end))

    def _get_dates_generator(
        self,
        n: int = None,
        start: datetime.datetime = None,
        end: datetime.datetime = None,
    ) -> Generator[pendulum.DateTime, None, None]:
        """Retrieves dates from the schedule. Up to 1,000 candidate dates are checked
        following the start date.

        Args:
            n (int): The number of dates to generate
            start (datetime.datetime, optional): The first returned date will be on or
                after this date. Defaults to the current date. If a timezone-naive
                datetime is provided, it is assumed to be in the schedule's timezone.
            end (datetime.datetime, optional): No returned date will exceed this date.
                If a timezone-naive datetime is provided, it is assumed to be in the
                schedule's timezone.

        Returns:
            List[pendulum.DateTime]: a list of dates
        """
        if start is None:
            start = pendulum.now("UTC")

        start, end = _prepare_scheduling_start_and_end(start, end, self.timezone)

        if n is None:
            # if an end was supplied, we do our best to supply all matching dates (up to
            # MAX_ITERATIONS)
            if end is not None:
                n = MAX_ITERATIONS
            else:
                n = 1

        elif self.timezone:
            start = start.in_tz(self.timezone)

        # subtract one second from the start date, so that croniter returns it
        # as an event (if it meets the cron criteria)
        start = start.subtract(seconds=1)

        # Respect microseconds by rounding up
        if start.microsecond > 0:
            start += datetime.timedelta(seconds=1)

        # croniter's DST logic interferes with all other datetime libraries except pytz
        start_localized = pytz.timezone(start.tz.name).localize(
            datetime.datetime(
                year=start.year,
                month=start.month,
                day=start.day,
                hour=start.hour,
                minute=start.minute,
                second=start.second,
                microsecond=start.microsecond,
            )
        )
        start_naive_tz = start.naive()

        cron = croniter(self.cron, start_naive_tz, day_or=self.day_or)  # type: ignore
        dates = set()
        counter = 0

        while True:
            # croniter does not handle DST properly when the start time is
            # in and around when the actual shift occurs. To work around this,
            # we use the naive start time to get the next cron date delta, then
            # add that time to the original scheduling anchor.
            next_time = cron.get_next(datetime.datetime)
            delta = next_time - start_naive_tz
            next_date = pendulum.instance(start_localized + delta)

            # if the end date was exceeded, exit
            if end and next_date > end:
                break
            # ensure no duplicates; weird things can happen with DST
            if next_date not in dates:
                dates.add(next_date)
                yield next_date

            # if enough dates have been collected or enough attempts were made, exit
            if len(dates) >= n or counter > MAX_ITERATIONS:
                break

            counter += 1

get_dates async

Retrieves dates from the schedule. Up to 1,000 candidate dates are checked following the start date.

Parameters:

Name Type Description Default
n int

The number of dates to generate

None
start datetime

The first returned date will be on or after this date. Defaults to None. If a timezone-naive datetime is provided, it is assumed to be in the schedule's timezone.

None
end datetime

The maximum scheduled date to return. If a timezone-naive datetime is provided, it is assumed to be in the schedule's timezone.

None

Returns:

Type Description
List[DateTime]

List[pendulum.DateTime]: A list of dates

Source code in /home/runner/work/docs/docs/prefect_source/src/prefect/server/schemas/schedules.py
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
async def get_dates(
    self,
    n: int = None,
    start: datetime.datetime = None,
    end: datetime.datetime = None,
) -> List[pendulum.DateTime]:
    """Retrieves dates from the schedule. Up to 1,000 candidate dates are checked
    following the start date.

    Args:
        n (int): The number of dates to generate
        start (datetime.datetime, optional): The first returned date will be on or
            after this date. Defaults to None.  If a timezone-naive datetime is
            provided, it is assumed to be in the schedule's timezone.
        end (datetime.datetime, optional): The maximum scheduled date to return. If
            a timezone-naive datetime is provided, it is assumed to be in the
            schedule's timezone.

    Returns:
        List[pendulum.DateTime]: A list of dates
    """
    return sorted(self._get_dates_generator(n=n, start=start, end=end))

IntervalSchedule

Bases: PrefectBaseModel

A schedule formed by adding interval increments to an anchor_date. If no anchor_date is supplied, the current UTC time is used. If a timezone-naive datetime is provided for anchor_date, it is assumed to be in the schedule's timezone (or UTC). Even if supplied with an IANA timezone, anchor dates are always stored as UTC offsets, so a timezone can be provided to determine localization behaviors like DST boundary handling. If none is provided it will be inferred from the anchor date.

NOTE: If the IntervalSchedule anchor_date or timezone is provided in a DST-observing timezone, then the schedule will adjust itself appropriately. Intervals greater than 24 hours will follow DST conventions, while intervals of less than 24 hours will follow UTC intervals. For example, an hourly schedule will fire every UTC hour, even across DST boundaries. When clocks are set back, this will result in two runs that appear to both be scheduled for 1am local time, even though they are an hour apart in UTC time. For longer intervals, like a daily schedule, the interval schedule will adjust for DST boundaries so that the clock-hour remains constant. This means that a daily schedule that always fires at 9am will observe DST and continue to fire at 9am in the local time zone.

Parameters:

Name Type Description Default
interval timedelta

an interval to schedule on

required
anchor_date DateTimeTZ

an anchor date to schedule increments against; if not provided, the current timestamp will be used

required
timezone str

a valid timezone string

required
Source code in /home/runner/work/docs/docs/prefect_source/src/prefect/server/schemas/schedules.py
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
class IntervalSchedule(PrefectBaseModel):
    """
    A schedule formed by adding `interval` increments to an `anchor_date`. If no
    `anchor_date` is supplied, the current UTC time is used.  If a
    timezone-naive datetime is provided for `anchor_date`, it is assumed to be
    in the schedule's timezone (or UTC). Even if supplied with an IANA timezone,
    anchor dates are always stored as UTC offsets, so a `timezone` can be
    provided to determine localization behaviors like DST boundary handling. If
    none is provided it will be inferred from the anchor date.

    NOTE: If the `IntervalSchedule` `anchor_date` or `timezone` is provided in a
    DST-observing timezone, then the schedule will adjust itself appropriately.
    Intervals greater than 24 hours will follow DST conventions, while intervals
    of less than 24 hours will follow UTC intervals. For example, an hourly
    schedule will fire every UTC hour, even across DST boundaries. When clocks
    are set back, this will result in two runs that *appear* to both be
    scheduled for 1am local time, even though they are an hour apart in UTC
    time. For longer intervals, like a daily schedule, the interval schedule
    will adjust for DST boundaries so that the clock-hour remains constant. This
    means that a daily schedule that always fires at 9am will observe DST and
    continue to fire at 9am in the local time zone.

    Args:
        interval (datetime.timedelta): an interval to schedule on
        anchor_date (DateTimeTZ, optional): an anchor date to schedule increments against;
            if not provided, the current timestamp will be used
        timezone (str, optional): a valid timezone string
    """

    class Config:
        extra = "forbid"
        exclude_none = True

    interval: datetime.timedelta
    anchor_date: DateTimeTZ = None
    timezone: Optional[str] = Field(default=None, example="America/New_York")

    @validator("interval")
    def interval_must_be_positive(cls, v):
        if v.total_seconds() <= 0:
            raise ValueError("The interval must be positive")
        return v

    @validator("anchor_date", always=True)
    def default_anchor_date(cls, v):
        if v is None:
            return pendulum.now("UTC")
        return pendulum.instance(v)

    @validator("timezone", always=True)
    def default_timezone(cls, v, *, values, **kwargs):
        # if was provided, make sure its a valid IANA string
        if v and v not in pendulum.tz.timezones:
            raise ValueError(f'Invalid timezone: "{v}"')

        # otherwise infer the timezone from the anchor date
        elif v is None and values.get("anchor_date"):
            tz = values["anchor_date"].tz.name
            if tz in pendulum.tz.timezones:
                return tz
            # sometimes anchor dates have "timezones" that are UTC offsets
            # like "-04:00". This happens when parsing ISO8601 strings.
            # In this case we, the correct inferred localization is "UTC".
            else:
                return "UTC"

        return v

    async def get_dates(
        self,
        n: int = None,
        start: datetime.datetime = None,
        end: datetime.datetime = None,
    ) -> List[pendulum.DateTime]:
        """Retrieves dates from the schedule. Up to 1,000 candidate dates are checked
        following the start date.

        Args:
            n (int): The number of dates to generate
            start (datetime.datetime, optional): The first returned date will be on or
                after this date. Defaults to None.  If a timezone-naive datetime is
                provided, it is assumed to be in the schedule's timezone.
            end (datetime.datetime, optional): The maximum scheduled date to return. If
                a timezone-naive datetime is provided, it is assumed to be in the
                schedule's timezone.

        Returns:
            List[pendulum.DateTime]: A list of dates
        """
        return sorted(self._get_dates_generator(n=n, start=start, end=end))

    def _get_dates_generator(
        self,
        n: int = None,
        start: datetime.datetime = None,
        end: datetime.datetime = None,
    ) -> Generator[pendulum.DateTime, None, None]:
        """Retrieves dates from the schedule. Up to 1,000 candidate dates are checked
        following the start date.

        Args:
            n (int): The number of dates to generate
            start (datetime.datetime, optional): The first returned date will be on or
                after this date. Defaults to None.  If a timezone-naive datetime is
                provided, it is assumed to be in the schedule's timezone.
            end (datetime.datetime, optional): The maximum scheduled date to return. If
                a timezone-naive datetime is provided, it is assumed to be in the
                schedule's timezone.

        Returns:
            List[pendulum.DateTime]: a list of dates
        """
        if n is None:
            # if an end was supplied, we do our best to supply all matching dates (up to
            # MAX_ITERATIONS)
            if end is not None:
                n = MAX_ITERATIONS
            else:
                n = 1

        if start is None:
            start = pendulum.now("UTC")

        anchor_tz = self.anchor_date.in_tz(self.timezone)
        start, end = _prepare_scheduling_start_and_end(start, end, self.timezone)

        # compute the offset between the anchor date and the start date to jump to the
        # next date
        offset = (start - anchor_tz).total_seconds() / self.interval.total_seconds()
        next_date = anchor_tz.add(seconds=self.interval.total_seconds() * int(offset))

        # break the interval into `days` and `seconds` because pendulum
        # will handle DST boundaries properly if days are provided, but not
        # if we add `total seconds`. Therefore, `next_date + self.interval`
        # fails while `next_date.add(days=days, seconds=seconds)` works.
        interval_days = self.interval.days
        interval_seconds = self.interval.total_seconds() - (
            interval_days * 24 * 60 * 60
        )

        # daylight saving time boundaries can create a situation where the next date is
        # before the start date, so we advance it if necessary
        while next_date < start:
            next_date = next_date.add(days=interval_days, seconds=interval_seconds)

        counter = 0
        dates = set()

        while True:
            # if the end date was exceeded, exit
            if end and next_date > end:
                break

            # ensure no duplicates; weird things can happen with DST
            if next_date not in dates:
                dates.add(next_date)
                yield next_date

            # if enough dates have been collected or enough attempts were made, exit
            if len(dates) >= n or counter > MAX_ITERATIONS:
                break

            counter += 1

            next_date = next_date.add(days=interval_days, seconds=interval_seconds)

get_dates async

Retrieves dates from the schedule. Up to 1,000 candidate dates are checked following the start date.

Parameters:

Name Type Description Default
n int

The number of dates to generate

None
start datetime

The first returned date will be on or after this date. Defaults to None. If a timezone-naive datetime is provided, it is assumed to be in the schedule's timezone.

None
end datetime

The maximum scheduled date to return. If a timezone-naive datetime is provided, it is assumed to be in the schedule's timezone.

None

Returns:

Type Description
List[DateTime]

List[pendulum.DateTime]: A list of dates

Source code in /home/runner/work/docs/docs/prefect_source/src/prefect/server/schemas/schedules.py
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
async def get_dates(
    self,
    n: int = None,
    start: datetime.datetime = None,
    end: datetime.datetime = None,
) -> List[pendulum.DateTime]:
    """Retrieves dates from the schedule. Up to 1,000 candidate dates are checked
    following the start date.

    Args:
        n (int): The number of dates to generate
        start (datetime.datetime, optional): The first returned date will be on or
            after this date. Defaults to None.  If a timezone-naive datetime is
            provided, it is assumed to be in the schedule's timezone.
        end (datetime.datetime, optional): The maximum scheduled date to return. If
            a timezone-naive datetime is provided, it is assumed to be in the
            schedule's timezone.

    Returns:
        List[pendulum.DateTime]: A list of dates
    """
    return sorted(self._get_dates_generator(n=n, start=start, end=end))

RRuleSchedule

Bases: PrefectBaseModel

RRule schedule, based on the iCalendar standard (RFC 5545) as implemented in dateutils.rrule.

RRules are appropriate for any kind of calendar-date manipulation, including irregular intervals, repetition, exclusions, week day or day-of-month adjustments, and more.

Note that as a calendar-oriented standard, RRuleSchedules are sensitive to to the initial timezone provided. A 9am daily schedule with a daylight saving time-aware start date will maintain a local 9am time through DST boundaries; a 9am daily schedule with a UTC start date will maintain a 9am UTC time.

Parameters:

Name Type Description Default
rrule str

a valid RRule string

required
timezone str

a valid timezone string

required
Source code in /home/runner/work/docs/docs/prefect_source/src/prefect/server/schemas/schedules.py
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
class RRuleSchedule(PrefectBaseModel):
    """
    RRule schedule, based on the iCalendar standard
    ([RFC 5545](https://datatracker.ietf.org/doc/html/rfc5545)) as
    implemented in `dateutils.rrule`.

    RRules are appropriate for any kind of calendar-date manipulation, including
    irregular intervals, repetition, exclusions, week day or day-of-month
    adjustments, and more.

    Note that as a calendar-oriented standard, `RRuleSchedules` are sensitive to
    to the initial timezone provided. A 9am daily schedule with a daylight saving
    time-aware start date will maintain a local 9am time through DST boundaries;
    a 9am daily schedule with a UTC start date will maintain a 9am UTC time.

    Args:
        rrule (str): a valid RRule string
        timezone (str, optional): a valid timezone string
    """

    class Config:
        extra = "forbid"

    rrule: str
    timezone: Optional[str] = Field(default=None, example="America/New_York")

    @validator("rrule")
    def validate_rrule_str(cls, v):
        # attempt to parse the rrule string as an rrule object
        # this will error if the string is invalid
        try:
            dateutil.rrule.rrulestr(v, cache=True)
        except ValueError as exc:
            # rrules errors are a mix of cryptic and informative
            # so reraise to be clear that the string was invalid
            raise ValueError(f'Invalid RRule string "{v}": {exc}')
        if len(v) > MAX_RRULE_LENGTH:
            raise ValueError(
                f'Invalid RRule string "{v[:40]}..."\n'
                f"Max length is {MAX_RRULE_LENGTH}, got {len(v)}"
            )
        return v

    @classmethod
    def from_rrule(cls, rrule: dateutil.rrule.rrule):
        if isinstance(rrule, dateutil.rrule.rrule):
            if rrule._dtstart.tzinfo is not None:
                timezone = rrule._dtstart.tzinfo.name
            else:
                timezone = "UTC"
            return RRuleSchedule(rrule=str(rrule), timezone=timezone)
        elif isinstance(rrule, dateutil.rrule.rruleset):
            dtstarts = [rr._dtstart for rr in rrule._rrule if rr._dtstart is not None]
            unique_dstarts = set(pendulum.instance(d).in_tz("UTC") for d in dtstarts)
            unique_timezones = set(d.tzinfo for d in dtstarts if d.tzinfo is not None)

            if len(unique_timezones) > 1:
                raise ValueError(
                    f"rruleset has too many dtstart timezones: {unique_timezones}"
                )

            if len(unique_dstarts) > 1:
                raise ValueError(f"rruleset has too many dtstarts: {unique_dstarts}")

            if unique_dstarts and unique_timezones:
                timezone = dtstarts[0].tzinfo.name
            else:
                timezone = "UTC"

            rruleset_string = ""
            if rrule._rrule:
                rruleset_string += "\n".join(str(r) for r in rrule._rrule)
            if rrule._exrule:
                rruleset_string += "\n" if rruleset_string else ""
                rruleset_string += "\n".join(str(r) for r in rrule._exrule).replace(
                    "RRULE", "EXRULE"
                )
            if rrule._rdate:
                rruleset_string += "\n" if rruleset_string else ""
                rruleset_string += "RDATE:" + ",".join(
                    rd.strftime("%Y%m%dT%H%M%SZ") for rd in rrule._rdate
                )
            if rrule._exdate:
                rruleset_string += "\n" if rruleset_string else ""
                rruleset_string += "EXDATE:" + ",".join(
                    exd.strftime("%Y%m%dT%H%M%SZ") for exd in rrule._exdate
                )
            return RRuleSchedule(rrule=rruleset_string, timezone=timezone)
        else:
            raise ValueError(f"Invalid RRule object: {rrule}")

    def to_rrule(self) -> dateutil.rrule.rrule:
        """
        Since rrule doesn't properly serialize/deserialize timezones, we localize dates
        here
        """
        rrule = dateutil.rrule.rrulestr(
            self.rrule,
            dtstart=DEFAULT_ANCHOR_DATE,
            cache=True,
        )
        timezone = dateutil.tz.gettz(self.timezone)
        if isinstance(rrule, dateutil.rrule.rrule):
            kwargs = dict(dtstart=rrule._dtstart.replace(tzinfo=timezone))
            if rrule._until:
                kwargs.update(
                    until=rrule._until.replace(tzinfo=timezone),
                )
            return rrule.replace(**kwargs)
        elif isinstance(rrule, dateutil.rrule.rruleset):
            # update rrules
            localized_rrules = []
            for rr in rrule._rrule:
                kwargs = dict(dtstart=rr._dtstart.replace(tzinfo=timezone))
                if rr._until:
                    kwargs.update(
                        until=rr._until.replace(tzinfo=timezone),
                    )
                localized_rrules.append(rr.replace(**kwargs))
            rrule._rrule = localized_rrules

            # update exrules
            localized_exrules = []
            for exr in rrule._exrule:
                kwargs = dict(dtstart=exr._dtstart.replace(tzinfo=timezone))
                if exr._until:
                    kwargs.update(
                        until=exr._until.replace(tzinfo=timezone),
                    )
                localized_exrules.append(exr.replace(**kwargs))
            rrule._exrule = localized_exrules

            # update rdates
            localized_rdates = []
            for rd in rrule._rdate:
                localized_rdates.append(rd.replace(tzinfo=timezone))
            rrule._rdate = localized_rdates

            # update exdates
            localized_exdates = []
            for exd in rrule._exdate:
                localized_exdates.append(exd.replace(tzinfo=timezone))
            rrule._exdate = localized_exdates

            return rrule

    @validator("timezone", always=True)
    def valid_timezone(cls, v):
        if v and v not in pytz.all_timezones_set:
            raise ValueError(f'Invalid timezone: "{v}"')
        elif v is None:
            return "UTC"
        return v

    async def get_dates(
        self,
        n: int = None,
        start: datetime.datetime = None,
        end: datetime.datetime = None,
    ) -> List[pendulum.DateTime]:
        """Retrieves dates from the schedule. Up to 1,000 candidate dates are checked
        following the start date.

        Args:
            n (int): The number of dates to generate
            start (datetime.datetime, optional): The first returned date will be on or
                after this date. Defaults to None.  If a timezone-naive datetime is
                provided, it is assumed to be in the schedule's timezone.
            end (datetime.datetime, optional): The maximum scheduled date to return. If
                a timezone-naive datetime is provided, it is assumed to be in the
                schedule's timezone.

        Returns:
            List[pendulum.DateTime]: A list of dates
        """
        return sorted(self._get_dates_generator(n=n, start=start, end=end))

    def _get_dates_generator(
        self,
        n: int = None,
        start: datetime.datetime = None,
        end: datetime.datetime = None,
    ) -> Generator[pendulum.DateTime, None, None]:
        """Retrieves dates from the schedule. Up to 1,000 candidate dates are checked
        following the start date.

        Args:
            n (int): The number of dates to generate
            start (datetime.datetime, optional): The first returned date will be on or
                after this date. Defaults to the current date. If a timezone-naive
                datetime is provided, it is assumed to be in the schedule's timezone.
            end (datetime.datetime, optional): No returned date will exceed this date.
                If a timezone-naive datetime is provided, it is assumed to be in the
                schedule's timezone.

        Returns:
            List[pendulum.DateTime]: a list of dates
        """
        if start is None:
            start = pendulum.now("UTC")

        start, end = _prepare_scheduling_start_and_end(start, end, self.timezone)

        if n is None:
            # if an end was supplied, we do our best to supply all matching dates (up
            # to MAX_ITERATIONS)
            if end is not None:
                n = MAX_ITERATIONS
            else:
                n = 1

        dates = set()
        counter = 0

        # pass count = None to account for discrepancies with duplicates around DST
        # boundaries
        for next_date in self.to_rrule().xafter(start, count=None, inc=True):
            next_date = pendulum.instance(next_date).in_tz(self.timezone)

            # if the end date was exceeded, exit
            if end and next_date > end:
                break

            # ensure no duplicates; weird things can happen with DST
            if next_date not in dates:
                dates.add(next_date)
                yield next_date

            # if enough dates have been collected or enough attempts were made, exit
            if len(dates) >= n or counter > MAX_ITERATIONS:
                break

            counter += 1

get_dates async

Retrieves dates from the schedule. Up to 1,000 candidate dates are checked following the start date.

Parameters:

Name Type Description Default
n int

The number of dates to generate

None
start datetime

The first returned date will be on or after this date. Defaults to None. If a timezone-naive datetime is provided, it is assumed to be in the schedule's timezone.

None
end datetime

The maximum scheduled date to return. If a timezone-naive datetime is provided, it is assumed to be in the schedule's timezone.

None

Returns:

Type Description
List[DateTime]

List[pendulum.DateTime]: A list of dates

Source code in /home/runner/work/docs/docs/prefect_source/src/prefect/server/schemas/schedules.py
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
async def get_dates(
    self,
    n: int = None,
    start: datetime.datetime = None,
    end: datetime.datetime = None,
) -> List[pendulum.DateTime]:
    """Retrieves dates from the schedule. Up to 1,000 candidate dates are checked
    following the start date.

    Args:
        n (int): The number of dates to generate
        start (datetime.datetime, optional): The first returned date will be on or
            after this date. Defaults to None.  If a timezone-naive datetime is
            provided, it is assumed to be in the schedule's timezone.
        end (datetime.datetime, optional): The maximum scheduled date to return. If
            a timezone-naive datetime is provided, it is assumed to be in the
            schedule's timezone.

    Returns:
        List[pendulum.DateTime]: A list of dates
    """
    return sorted(self._get_dates_generator(n=n, start=start, end=end))

to_rrule

Since rrule doesn't properly serialize/deserialize timezones, we localize dates here

Source code in /home/runner/work/docs/docs/prefect_source/src/prefect/server/schemas/schedules.py
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
def to_rrule(self) -> dateutil.rrule.rrule:
    """
    Since rrule doesn't properly serialize/deserialize timezones, we localize dates
    here
    """
    rrule = dateutil.rrule.rrulestr(
        self.rrule,
        dtstart=DEFAULT_ANCHOR_DATE,
        cache=True,
    )
    timezone = dateutil.tz.gettz(self.timezone)
    if isinstance(rrule, dateutil.rrule.rrule):
        kwargs = dict(dtstart=rrule._dtstart.replace(tzinfo=timezone))
        if rrule._until:
            kwargs.update(
                until=rrule._until.replace(tzinfo=timezone),
            )
        return rrule.replace(**kwargs)
    elif isinstance(rrule, dateutil.rrule.rruleset):
        # update rrules
        localized_rrules = []
        for rr in rrule._rrule:
            kwargs = dict(dtstart=rr._dtstart.replace(tzinfo=timezone))
            if rr._until:
                kwargs.update(
                    until=rr._until.replace(tzinfo=timezone),
                )
            localized_rrules.append(rr.replace(**kwargs))
        rrule._rrule = localized_rrules

        # update exrules
        localized_exrules = []
        for exr in rrule._exrule:
            kwargs = dict(dtstart=exr._dtstart.replace(tzinfo=timezone))
            if exr._until:
                kwargs.update(
                    until=exr._until.replace(tzinfo=timezone),
                )
            localized_exrules.append(exr.replace(**kwargs))
        rrule._exrule = localized_exrules

        # update rdates
        localized_rdates = []
        for rd in rrule._rdate:
            localized_rdates.append(rd.replace(tzinfo=timezone))
        rrule._rdate = localized_rdates

        # update exdates
        localized_exdates = []
        for exd in rrule._exdate:
            localized_exdates.append(exd.replace(tzinfo=timezone))
        rrule._exdate = localized_exdates

        return rrule